Ultra generator

Feb 8, 2020#530
the_shootist

So I just received my Ultra package from abeland1. It was packaged superbly and arrived in perfect shape. My wife asked me what it was and I explained it to her. She asked, “should I use it too?” and I said sure!! I told her to do some research on the benefits of CS and off she went. 5 minutes later she comes downstairs with a printout from the mayo clinic site dispelling CS and stating it can do irreparable harm.. I told her I’ve read those type of articles and have also read where CS is a natural healer and antibiotic/anti fungal. She challenged me and asked who should I believe, the Mayo clinic or some people on the internet trying to make a buck? I told her that I trust my gut and don’t trust what I read from the medical community as much as most sheep, errr…I mean people. I suppose I’ll be the only one in the house using CS.

Anyway, I’m making my first batch of 50ppm EIS as I type this. WooHoo!!

Dec 31, 2019#485
Evl Bnkr said:

Finally pulled the trigger and ordered an Ultra generator. Looking forward to a healthy New Year! Thanks to all the content on this thread and the articles that were pointed to I reached a point of having enough knowledge to realize that the purchase is actually a “no brainer” (I may tend to over analyze things a bit  – occupational hazard I think).
Anyway – many many thanks to Abe, Goldbrix and all those that asked the questions (the only dumb questions are the ones you don’t ask!) that created such a rich dialogue and tremendous educational environment. I have benefited tremendously and would rank this thread in my top three most beneficial ever. Thanks again all!

I replied:

Wow! What a high note to end the year. But hold on. I only started this. It was pure good luck that Goldbrix had one of my little CSG1’s and was the first respondent to the thread. You are quite correct in “thanking all those that asked the questions (the only dumb questions are the ones you don’t ask!) that created such a rich dialogue and great educational environment. “
It is the question that determines the quality of the dialogue. We should also acknowledge the contribution of some posters who disagreed with the information I presented. The observation that “no two batches ever seem to be the same” using the methods I recommended presented me with a challenge. The result was the Ultra. We now can produce 98% ionic EIS at a level of 50 PPM reliably.

#380I keep hearing that 10 PPM EIS is all anyone ever needs for anything and any more powerful and any higher ionic level is useless. That is what is being fed the public by the sellers of colloidal silver and even most of the colloidal silver generator manufacturers as well.. Here are the facts:
Laboratory Studies Conducted by The University Of North Texas
Product: SilverKare at 15 PPM and 30 PPM
Isolated Colloidal Silver
Time-Kill Study Conducted by UNT
Mark A. Farinha, Ph.D. Professor of Microbiology
Microbes tested: Staphylococcus epidermidis, Staphylococcus aureus and Enterococcus faecalis

[ Staphylococcus Aureues, example only ]
Results: Reduction of population counts from >10 million to undetectable in four minutes of exposure.

Microbes Tested: Salmonella typhimurium and Pseudomonas aeruginosa

[ Example of Pseudomonas aeruginosa ]

Results: Reduction of population counts from >10 million to undetectable in four minutes of exposure.

Microbe Tested: Candida albicans

[ Example of Candida albicans ]
Results: Reduction of population counts from >1 billion to undetectable in two minutes.
Details of the Study
Staphyloccus aureus ATCC12600
Two concentrations of isolated silver were used, one 15 PPM isolated colloidal silver and one 30 PPM isolated colloidal silver. The 30 PPM colloidal silver achieved results markedly faster, although both formulations achieved the desired results within four minutes:

The in-vitro lab results conclusively demonstrate that a high quality isolated colloidal silver product is remarkably effective in concentrations of both 15 PPM and 30 PPM against Staph Aureus. A greater concentration demonstrated faster action, however, the results in the first four minutes dropped population counts to nearly non-existant levels with both formulations.
Pseudomonas aeruginosa PAO
Two concentrations of isolated silver were used, one 15 PPM isolated colloidal silver and one 30 PPM isolated colloidal silver. The 30 PPM colloidal silver achieved results markedly faster, although both formulations achieved the desired results within four minutes:

The in-vitro lab results conclusively demonstrate that a high quality isolated colloidal silver product is remarkably effective in concentrations of both 15 PPM and 30 PPM against Psuedomonas aeruginosa. A greater concentration demonstrated faster action, however, the results in the first four minutes dropped population counts to nearly non-existant levels with both formulations.

Salmonella typhimurium

Two concentrations of isolated silver were used, one 15 PPM isolated colloidal silver and one 30 PPM isolated colloidal silver. The 30 PPM colloidal silver achieved results markedly faster, although both formulations achieved the desired results within four minutes:
The in-vitro lab results conclusively demonstrate that a high quality isolated colloidal silver product is remarkably effective in concentrations of both 15 PPM and 30 PPM against Salmonella typhimurium. A greater concentration demonstrated faster action, although the results in the first four minutes dropped population counts to nearly non-existant levels with both formulations.
Candida albicans
One 30 PPM isolated colloidal silver was used in this study.

The in-vitro lab results conclusively demonstrate that a high quality isolated colloidal silver product is remarkably effective in concentrations of both 15 PPM and 30 PPM against Salmonella typhimurium. A greater concentration demonstrated faster action, although the results in the first four minutes dropped population counts to nearly non-existant levels with both formulations.

#397dozer99 said:

Thinking about making my own CS. So question is, Is the Ultra from AtlasNova the easiest to use. I am not a electrically inclined person. I literately shock myself when I look at an outlet wrong. Any input would be great!

Weatherman replied:

My first experience with EIS was buying an Ultra, so I cannot compare to other devices, but the Ultra is as simple as I can imagine. With the Ultra, there are no decisions to make, no meters to read, no adjustments to do, and no worries in the process. Just fill the jug with high quality (near distilled) water, turn the Ultra power on, and wait for it to complete the process. After using mine, I bought another Ultra for my relatives precisely because it is simple enough for them to use it when I would not be there to help. Look at the instructions for an alternative you might consider, and see if they sound more complicated than fill with water and turn on the power.

INTRODUCTION:

The Atlasnova Colloidal Silver Generator-ULTRA (CSG-ULTRA) is the first colloidal silver generator on the market a with Liquid Crystal Display (LCD) and at the same time an automatic colloidal silver generator. With the LCD, you can monitor the flowing current, the number of hours of operation, and the estimated Parts Per Million (PPM).
Most important, even before the process of making colloidal silver starts, the Atlasnova CSG-ULTRA will check the purity of your distilled water. It has the capability of accepting OR rejecting your distilled water, based on its purity.
If it accepts your distilled water, it will continue the process. If it rejects your distilled water, it will inform you through a message on the LCD. The CSG-ULTRA will produce a half-gallon of at least 10 ppm in 7 hours and 50 ppm in 10 days, of crystal clear, high quality colloidal silver (See Mode Of Operations).

REMINDER:
Before you start making your colloidal silver, make sure your ATLASNOVA CSG-ULTRA is turned OFF (on/off switch
to the center position) and you have distilled water in the half-gallon Mason jar provided.

MODE OF OPERATIONS:

SWITCH MODE IN LEFT POSITION

Moving the on/off switch to the LEFT MODE position (facing the CSG-ULTRA) will produce a half gallon of 50 ppm, crystal clear, high quality colloidal silver in 10 days. The measurement of PPM will vary depending
on the quality of your distilled water. The SWITCH MODE IN THE LEFT POSITION will cease the making of colloidal silver automatically in a matter of 10 days. You can however, stop the process once you see your
desired PPM, for example, 10 ppm, 20 ppm, etc.

 SWITCH MODE IN RIGHT POSITION

Moving the on/off switch to the RIGHT MODE position (facing the CSG-ULTRA) will give you a half gallon of at least 10 ppm crystal clear, high quality colloidal silver in 7 hours. The measurement of PPM will vary
depending on the quality of your distilled water. The SWITCH MODE IN THE RIGHT POSITION will cease the making of colloidal silver automatically in 7 hours.

2) Pour distilled water into the half gallon Mason jar. Do not fill the jar beyond one inch below the top of the jar. Make sure your CSG-ULTRA is turned off (On/Off switch in the center position). Place the ATLASNOVA CSG-ULTRA with the silver wires on to the jar as shown below.

Make sure that none of the silver wires are touching any part of the jar where the water is present. The silver wires should be as far apart as possible.

3) Plug the Universal Power Supply into a standard AC outlet.

4) Once the generator is plugged in, you can either move the on/off switch to the left or right position. And you will then see the following messages:

NOTE: The Atlasnova CSG-ULTRA has two (2) modes of operations – the LEFT MODE POSITION and the RIGHT MODE POSITION.

 SWITCH MODE IN LEFT POSITION –
Moving the on/off switch to the LEFT MODE position (facing the CSG ULTRA) will produce a half gallon of 50 ppm, crystal clear, high quality colloidal silver in 10 days. The measurement of PPM will vary depending
on the quality of your distilled water. The SWITCH MODE IN THE LEFT POSITION will cease the making of colloidal silver automatically in a matter of 10 days. You can however, stop the process once you see your
desired PPM, for example, 10 ppm, 20 ppm, etc., To turn the generator off, move the on/off switch to the center position.

 SWITCH MODE IN RIGHT POSITION –
Moving the on/off switch to the RIGHT MODE position (facing the CSG-ULTRA) will give you a half gallon of at least 10 ppm crystal clear, high quality colloidal silver in 7 hours. The measurement of PPM will vary
depending on the quality of your distilled water. The SWITCH MODE IN THE RIGHT POSITION will cease the making of colloidal silver automatically in 7 hours.

5) Whichever mode of operation you opt to use, a series of messages will appear on the LCD. Please make sure you read and follow the LCD messages. The following are examples of the messages you will see during the process in making your colloidal silver:

TESTING THE PURITY OF WATER:

If it accepts you water, you will see this message:

If it rejects your water, you will see this message:

Please note that the water reading will vary depending on the quality of your distilled water. Once it rejects your water, you need to turn off the generator by moving the on/off switch to the center position, remove
the generator from the Mason jar, and start a new batch.

Please note that the PPM reading will vary depending on the quality of your distilled water.
Many people still believe that Colloidal Silver should be the color of yellow. The fact is that a yellow color Colloidal Silver indicates particles in excess of 40 nanometers in size. Crystal clear water colloidal silver means smaller particles. Some people refer to silver particles this small as nano silver.

6) Once the generator reached its maximum hours of operations, you will see these messages:

7) Once these messages appear, turn the generator off by moving the on/off switch to the center position, remove the generator from the jar, and place the lid back on the Mason jar to cover your half gallon of colloidal silver until you are ready to use it.

REMINDER MESSAGES:

During the process in making your colloidal silver, you will see these reminder messages.

Why 50 ppm ?

Why should I go to the trouble of making 50 ppm 98% ionic EIS with an advanced ultra colloidal silver generator?
One reason, by using it as a mouth rinse occasionally, you might increase your chances of growing old without losing your marbles.

Alzheimer’s disease has destroyed neurons in the right-hand brain.
Periodontitis is a common, progressive disease that affects the supporting structures of the teeth, causing loss of attachment to the bone and often resulting in tooth loss. Moderate disease eventually affects the majority of persons, and advanced disease is seen in nearly half of individuals over 65. A limited number of bacterial species have been associated with periodontitis, and the strongest evidence has accumulated to implicate Porphyromonas gingivalis.

The Porphyromonas gingivalis bacteria that can cause gum disease
It might seem surprising that a mouth bacterium has been implicated in Alzheimer’s disease . But it wouldn’t be the first time an illness has turned out to have an unexpected infectious origin.
The iconic case is stomach ulcers, once thought to be caused by stress or excess acid, and treated with acid-lowering medications. Then Australian doctor Barry Marshall showed that a stomach bacterium called Helicobacter pylori was behind them, a feat that won him a Nobel prize.

https://www.newscientist.com/articl…ow-what-causes-alzheimers-and-how-to-stop-it/